Hi Ulrich,
Thank you for the patch.
On Thursday 15 Sep 2016 15:24:07 Ulrich Hecht wrote:
> Fall back to input 0 if "default-input" property is not present.
>
> Additionally, documentation in commit bf9c82278c34 ("[media]
> media: adv7604: ability to read default input port from DT") states
> that the "default-input" property should reside directly in the node
> for adv7612.
Actually it doesn't. The DT bindings specifies "default-input" as an endpoint
property, even though the example sets it in the device node. That's
inconsistent so the DT bindings document should be fixed. I believe the
property should be set in the device node, it doesn't make much sense to have
different default inputs per port.
> Hence, also adjust the parsing to make the implementation
> consistent with this.
>
> Based on patch by William Towle <william.towle@xxxxxxxxxxxxxxx>.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> ---
> drivers/media/i2c/adv7604.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 4003831..055c9df 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -3077,10 +3077,13 @@ static int adv76xx_parse_dt(struct adv76xx_state
> *state) if (!of_property_read_u32(endpoint, "default-input", &v))
> state->pdata.default_input = v;
> else
> - state->pdata.default_input = -1;
> + state->pdata.default_input = 0;
>
> of_node_put(endpoint);
>
> + if (!of_property_read_u32(np, "default-input", &v))
> + state->pdata.default_input = v;
> +
> flags = bus_cfg.bus.parallel.flags;
>
> if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
--
Regards,
Laurent Pinchart
