GEN2: Initialization of VIN failed at upstream v4.8-rc2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Niklas

As you know the information about initialization of VIN failed at upstream v4.8-rc2 from the report of "The failure summary report of GEN2 for Linux v4.8-rc2".
"…
[ 5.589485] [<c0549114>] (of_node_put) from [<c0510558>] (rcar_vin_probe+0x1c4/0x2d0) [ 5.612949] [<c0510394>] (rcar_vin_probe) from [<c040dd60>] (platform_drv_probe+0x58/0xa4)
[ 5.942909] [<c040e6f0>] (__platform_driver_register) from [<c091fa58>] (rcar_vin_driver_init+0x18/0x20) [ 5.971318] [<c091fa40>] (rcar_vin_driver_init) from [<c0900e44>] (do_one_initcall+0xb4/0x164) ...
...”

I have found the patch that causing of this issue:
"f00add9 [media] rcar-vin: add Renesas R-Car VIN driver"

Please have a look at this issue when you have time.

Best regards,
Hiep.




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux