[PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This supports GPIO leds on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Changes in version 3:
- initially added
Changes in version 4:
- removed led4 in favor of gpio-keys
- added label
Changes in version 5:
- nothing

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -31,6 +31,19 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			label = "LED5";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			label = "LED6";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &extal_clk {
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux