[PATCH v2] ARM: dts: blanche: add support for general purpose LEDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for the general purpose LEDs on the Blanche board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>

---
This patch is against the 'renesas-devel-20160824-v4.8-rc3' of Simon Horman's
'renesas.git'.

Changes in version 2:
- removed the "label" props.

 arch/arm/boot/dts/r8a7792-blanche.dts |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -159,6 +159,23 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux