Populating card_busy caused a side-effect on a chip variant we don't
have documentation for (r8a73a4). So, enable it and voltage switching
only on devices known to support those features.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sh_mobile_sdhi.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index c4e63b7790d719..d679c8a533b6e5 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -376,8 +376,14 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
host->clk_update = sh_mobile_sdhi_clk_update;
host->clk_disable = sh_mobile_sdhi_clk_disable;
host->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk;
- host->card_busy = sh_mobile_sdhi_card_busy;
- host->start_signal_voltage_switch = sh_mobile_sdhi_start_signal_voltage_switch;
+
+ /* SDR speeds are only available on Gen2+ */
+ if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) {
+ /* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */
+ host->card_busy = sh_mobile_sdhi_card_busy;
+ host->start_signal_voltage_switch =
+ sh_mobile_sdhi_start_signal_voltage_switch;
+ }
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */
--
2.9.3
