Hi, this patch set updates drivers, documentation and DT to enable SDHI0 & 3 on the r8a7796/salvator-x. This includes defining nodes for all available SDHI and GPIO devices. I have boot-tested this which seems successful. However, I do not have physical access to an r8a7796/salvator-x board and the one that I have remote access to does not appear to have any SD cards present. I would be grateful of any testing anyone can provide. Based on renesas-drivers-2016-08-09-v4.8-rc1 Provided for testing as the topic/r8a7796-sdhi-v2 branch in my renesas tree on kernel.org. Changes since v1 noted in individual changelogs. Acks from v1 also added. Ai Kyuse (1): mmc: sh_mobile_sdhi: Add r8a7796 support Simon Horman (4): clk: renesas: r8a7796: Add SDIF clocks gpio: rcar: Add r8a7796 (R-Car M3-W) support arm64: dts: r8a7796: add SDHI nodes arm64: dts: r8a7796: salvator-x: enable SDHI0 & 3 Takeshi Kihara (3): clk: renesas: r8a7796: Add GPIO clocks pinctrl: sh-pfc: r8a7796: Add SDHI pins, groups and functions arm64: dts: r8a7796: Add GPIO device nodes .../devicetree/bindings/gpio/renesas,gpio-rcar.txt | 1 + Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 1 + arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 84 +++++++ arch/arm64/boot/dts/renesas/r8a7796.dtsi | 154 ++++++++++++ drivers/clk/renesas/r8a7796-cpg-mssr.c | 18 ++ drivers/gpio/gpio-rcar.c | 4 + drivers/mmc/host/sh_mobile_sdhi.c | 1 + drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 275 +++++++++++++++++++++ 8 files changed, 538 insertions(+) -- 2.7.0.rc3.207.g0ac5344
