Hi Sergei,
On Fri, Aug 19, 2016 at 11:42:54PM +0300, Sergei Shtylyov wrote:
> Define the Blanche board dependent part of the DU device node.
> Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
> (connected to DU0) and ADV7123 video DAC (connected to DU1). Add the
> necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
> connectors.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> ---
> This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon Horman's
> 'renesas.git' repo plus the general purpose switches patch and the SDHI0 patch
> posted earlier.
>
> arch/arm/boot/dts/r8a7792-blanche.dts | 125 ++++++++++++++++++++++++++++++++++
> 1 file changed, 125 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
...
> @@ -186,3 +251,63 @@
> cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
> status = "okay";
> };
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
Is it intentional that there are no pinctrl properties here?
...
