[PATCH 08/26] ARM: dts: r8a7792: add CAN clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>

The R-Car CAN controllers can derive  the CAN  bus  clock not only from
their peripheral  clock input (clkp1) but also from the other internal
clock (clkp2) and the external clock fed on the CAN_CLK pin.  Describe
those  clocks in  the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7792.dtsi | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 37c9d95688cf..af8020bfc030 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -511,6 +511,13 @@
 			clock-div = <8>;
 			clock-mult = <1>;
 		};
+		rcan_clk: rcan {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <49>;
+			clock-mult = <1>;
+		};
 
 		/* Gate clocks */
 		mstp1_clks: mstp1_clks@e6150134 {
@@ -572,7 +579,8 @@
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
 			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
 				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>;
+				 <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>,
+				 <&cp_clk>, <&cp_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6
@@ -580,12 +588,14 @@
 				R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2
 				R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0
 				R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10
+				R8A7792_CLK_CAN1 R8A7792_CLK_CAN0
 				R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8
 			>;
 			clock-output-names =
 				"gpio7", "gpio6", "gpio5", "gpio4",
 				"gpio3", "gpio2", "gpio1", "gpio0",
-				"gpio11", "gpio10", "gpio9", "gpio8";
+				"gpio11", "gpio10", "can1", "can0",
+				"gpio9", "gpio8";
 		};
 	};
 
@@ -604,4 +614,12 @@
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
 	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
 };
-- 
2.7.0.rc3.207.g0ac5344




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux