[PATCH] arm64: dts: renesas: salvator-x: Configure pins for the DU RGB output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 7 +++++++
 1 file changed, 7 insertions(+)

This patch depends on "[PATCH] pinctrl: sh-pfc: r8a7795: Add DU support"
posted a few minutes ago to the linux-renesas-soc mailing list, as well as on
the "[PATCH v2 0/4] R-Car Gen3 DU enablement on Salvator-X board" series
posted yesterday to the same list.

As the boot loader configures the DU pins on Salvator-X we can safely delay
this patch by one kernel version to let the pinctrl dependency hit mainling
first.

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 64a29a87a724..b1eab6876f8c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -181,6 +181,8 @@
 };
 
 &du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	ports {
@@ -227,6 +229,11 @@
 		function = "avb";
 	};
 
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux