[PATCH 0/2 v2] DesignWare HDMI I2S suport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thierry, Russell, Mark

These are v2 of DesignWare HDMI I2S support patches.
It will use ALSA SoC hdmi-codec driver, but we can't use it as-is
at this point.
1) patch tidyup hdmi-codec driver to enable dw-hdmi I2S support.
2) patch is based on it.
Difficult is that these 2 patches are under different maintainer.

Kuninori Morimoto (2):
      1) ASoC: hdmi-codec: enable multi probe for same device
      2) drm: bridge: add DesignWare HDMI I2S audio support

 drivers/gpu/drm/bridge/Kconfig             |   8 ++++++++
 drivers/gpu/drm/bridge/Makefile            |   1 +
 drivers/gpu/drm/bridge/dw-hdmi-audio.h     |   7 +++++++
 drivers/gpu/drm/bridge/dw-hdmi-i2s-audio.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/bridge/dw-hdmi.c           |  22 ++++++++++++++++++--
 drivers/gpu/drm/bridge/dw-hdmi.h           |  21 +++++++++++++++++++
 sound/soc/codecs/hdmi-codec.c              |  67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 7 files changed, 251 insertions(+), 5 deletions(-)


-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux