From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Change the console alias to "serial0", for consistency with other
boards (the first unlabeled serial port is always called "serial0").
This does change the serial console from /dev/ttySC2 to /dev/ttySC0.
Add the serial port config to "chosen/stdout-path", which requires
referring to the port by alias.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r7s72100-genmai.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 05ba9953b4d8..118a8e2b86bd 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -17,12 +17,12 @@
compatible = "renesas,genmai", "renesas,r7s72100";
aliases {
- serial2 = &scif2;
+ serial0 = &scif2;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
memory@8000000 {
--
2.7.0.rc3.207.g0ac5344
