From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> It must be "drive-strength", with a hyphen. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 74e6ec0339d6fb..e4cf022c992ed1 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -72,7 +72,7 @@ Pin Configuration Node Properties: The pin configuration parameters use the generic pinconf bindings defined in pinctrl-bindings.txt in this directory. The supported parameters are -bias-disable, bias-pull-up, bias-pull-down, drive strength and power-source. For +bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For pins that have a configurable I/O voltage, the power-source value should be the nominal I/O voltage in millivolts. -- 2.8.1
