[PATCH 06/19] ARM: dts: lager: Name serial port pfc subnodes after device names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Name the Pin Function Controller subnodes for SCIF0 and SCIFA1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 15cef6232a391e02..9cb055a932edabc7 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -317,7 +317,7 @@
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
@@ -337,7 +337,7 @@
 		function = "intc";
 	};
 
-	scifa1_pins: serial1 {
+	scifa1_pins: scifa1 {
 		groups = "scifa1_data";
 		function = "scifa1";
 	};
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux