Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.
This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/r8a7793-gose.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f748360ee85712f1..995e1e0fb1ff4f57 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -320,12 +320,12 @@
function = "du";
};
- scif0_pins: serial0 {
+ scif0_pins: scif0 {
groups = "scif0_data_d";
function = "scif0";
};
- scif1_pins: serial1 {
+ scif1_pins: scif1 {
groups = "scif1_data_d";
function = "scif1";
};
--
1.9.1
