This patch fixes an issue that the CFIFOSEL register value is possible
to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer
using CFIFO may not work correctly.
For example:
# modprobe g_multi file=usb-storage.bin
# ifconfig usb0 192.168.1.1 up
(During the USB host is sending file to the mass storage)
# ifconfig usb0 down
In this case, since the u_ether.c may call usb_ep_enable() in
eth_stop(), if the renesas_usbhs driver is also using CFIFO for
mass storage, the mass storage may not work correctly.
So, this patch adds usbhs_lock() and usbhs_unlock() calling in
usbhsg_ep_enable() to protect CFIFOSEL register. This is because:
- CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration
- The CFIFOSEL (fifo->sel) is already protected by usbhs_lock()
Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
Cc: <stable@xxxxxxxxxxxxxxx> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/renesas_usbhs/mod_gadget.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 30345c2..50f3363 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -585,6 +585,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
struct usbhs_pipe *pipe;
int ret = -EIO;
+ unsigned long flags;
+
+ usbhs_lock(priv, flags);
/*
* if it already have pipe,
@@ -593,7 +596,8 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
if (uep->pipe) {
usbhs_pipe_clear(uep->pipe);
usbhs_pipe_sequence_data0(uep->pipe);
- return 0;
+ ret = 0;
+ goto usbhsg_ep_enable_end;
}
pipe = usbhs_pipe_malloc(priv,
@@ -621,6 +625,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
ret = 0;
}
+usbhsg_ep_enable_end:
+ usbhs_unlock(priv, flags);
+
return ret;
}
--
1.9.1
