This is in preparation for adding i2cexio1 which will use the
dmuxer for IIC1/I2C0.
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7790-lager.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 9d20ace33b01..71d62ca282ea 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -50,7 +50,7 @@
aliases {
serial0 = &scif0;
serial1 = &scifa1;
- i2c8 = "i2cexio";
+ i2c8 = "i2cexio0";
};
chosen {
@@ -263,10 +263,10 @@
* instantiate the slave device at runtime according to the documentation.
* You can then communicate with the slave via IIC3.
*/
- i2cexio: i2c-8 {
+ i2cexio0: i2c-8 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
- i2c-bus-name = "i2c-exio";
+ i2c-bus-name = "i2c-exio0";
#address-cells = <1>;
#size-cells = <0>;
};
@@ -580,12 +580,12 @@
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "i2c-exio";
+ pinctrl-names = "i2c-exio0";
};
&iic0 {
pinctrl-0 = <&iic0_pins>;
- pinctrl-names = "i2c-exio";
+ pinctrl-names = "i2c-exio0";
};
&iic1 {
--
2.1.4
