Improve documentation for the SCIFA/SCIFB Serial Port Control and Data
Registers:
- State clearly that the RTS and CTS lines are active-low,
- Document the bits related to the serial port's SCK, RXD, and TXD
pins.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
v3:
- Add Reviewed-by,
v2:
- New.
---
drivers/tty/serial/sh-sci.h | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 85a2b81ba0a845e5..e7d2bc692a581e9e 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -121,12 +121,18 @@ enum {
#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */
/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
-#define SCPCR_RTSC BIT(4) /* Serial Port RTS Pin / Output Pin */
-#define SCPCR_CTSC BIT(3) /* Serial Port CTS Pin / Input Pin */
+#define SCPCR_RTSC BIT(4) /* Serial Port RTS# Pin / Output Pin */
+#define SCPCR_CTSC BIT(3) /* Serial Port CTS# Pin / Input Pin */
+#define SCPCR_SCKC BIT(2) /* Serial Port SCK Pin / Output Pin */
+#define SCPCR_RXDC BIT(1) /* Serial Port RXD Pin / Input Pin */
+#define SCPCR_TXDC BIT(0) /* Serial Port TXD Pin / Output Pin */
/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
-#define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */
-#define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */
+#define SCPDR_RTSD BIT(4) /* Serial Port RTS# Output Pin Data */
+#define SCPDR_CTSD BIT(3) /* Serial Port CTS# Input Pin Data */
+#define SCPDR_SCKD BIT(2) /* Serial Port SCK Output Pin Data */
+#define SCPDR_RXDD BIT(1) /* Serial Port RXD Input Pin Data */
+#define SCPDR_TXDD BIT(0) /* Serial Port TXD Output Pin Data */
/*
* BRG Clock Select Register (Some SCIF and HSCIF)
--
1.9.1
