On Wed, Jun 01, 2016 at 01:09:58AM +0300, Sergei Shtylyov wrote: > Add macros usable by the device tree sources to reference the R8A7792 > clocks by index. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> > > --- > include/dt-bindings/clock/r8a7792-clock.h | 104 ++++++++++++++++++++++++++++++ > 1 file changed, 104 insertions(+) > > Index: renesas/include/dt-bindings/clock/r8a7792-clock.h > =================================================================== > --- /dev/null > +++ renesas/include/dt-bindings/clock/r8a7792-clock.h > @@ -0,0 +1,104 @@ > +/* > + * Copyright (C) 2016 Cogent Embedded, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_R8A7792_H__ > +#define __DT_BINDINGS_CLOCK_R8A7792_H__ > + > +/* CPG */ > +#define R8A7792_CLK_MAIN 0 > +#define R8A7792_CLK_PLL0 1 > +#define R8A7792_CLK_PLL1 2 > +#define R8A7792_CLK_PLL3 3 > +#define R8A7792_CLK_LB 4 > +#define R8A7792_CLK_QSPI 5 > +#define R8A7792_CLK_SDH 6 > +#define R8A7792_CLK_SD0 7 > +#define R8A7792_CLK_SD1 8 > +#define R8A7792_CLK_Z 9 According to my copy of the documentation (v2.00) SDH, SD0 and SD1 do not seem to be provided by the r8a7792 CPG. It does, however, provide RCAN and ADSP which are supported by the CPG driver. You may wish to add them now for completeness though from my point of view they could also be added later when they are used. I reviewed the values below. They appear to be complete and correct. > +/* MSTP0 */ > +#define R8A7792_CLK_MSIOF0 0 > + > +/* MSTP1 */ > +#define R8A7792_CLK_TMU1 11 > +#define R8A7792_CLK_TMU3 21 > +#define R8A7792_CLK_TMU2 22 > +#define R8A7792_CLK_CMT0 24 > +#define R8A7792_CLK_TMU0 25 > +#define R8A7792_CLK_VSP1DU1 27 > +#define R8A7792_CLK_VSP1DU0 28 > +#define R8A7792_CLK_VSP1_SY 31 > +/* MSTP2 */ > +#define R8A7792_CLK_MSIOF1 8 > +#define R8A7792_CLK_SYS_DMAC0 18 > +#define R8A7792_CLK_SYS_DMAC1 19 > +/* MSTP3 */ > +#define R8A7792_CLK_TPU0 4 > +#define R8A7792_CLK_SDHI0 14 > +#define R8A7792_CLK_CMT1 29 > + > +/* MSTP4 */ > +#define R8A7792_CLK_IRQC 7 > + > +/* MSTP5 */ > +#define R8A7792_CLK_AUDIO_DMAC0 2 > +#define R8A7792_CLK_THERMAL 22 > +#define R8A7792_CLK_PWM 23 > + > +/* MSTP7 */ > +#define R8A7792_CLK_HSCIF1 16 > +#define R8A7792_CLK_HSCIF0 17 > +#define R8A7792_CLK_SCIF3 18 > +#define R8A7792_CLK_SCIF2 19 > +#define R8A7792_CLK_SCIF1 20 > +#define R8A7792_CLK_SCIF0 21 > +#define R8A7792_CLK_DU1 23 > +#define R8A7792_CLK_DU0 24 > + > +/* MSTP8 */ > +#define R8A7792_CLK_VIN5 4 > +#define R8A7792_CLK_VIN4 5 > +#define R8A7792_CLK_VIN3 8 > +#define R8A7792_CLK_VIN2 9 > +#define R8A7792_CLK_VIN1 10 > +#define R8A7792_CLK_VIN0 11 > +#define R8A7792_CLK_ETHERAVB 12 > + > +/* MSTP9 */ > +#define R8A7792_CLK_GPIO7 4 > +#define R8A7792_CLK_GPIO6 5 > +#define R8A7792_CLK_GPIO5 7 > +#define R8A7792_CLK_GPIO4 8 > +#define R8A7792_CLK_GPIO3 9 > +#define R8A7792_CLK_GPIO2 10 > +#define R8A7792_CLK_GPIO1 11 > +#define R8A7792_CLK_GPIO0 12 > +#define R8A7792_CLK_GPIO11 13 > +#define R8A7792_CLK_GPIO10 14 > +#define R8A7792_CLK_CAN1 15 > +#define R8A7792_CLK_CAN0 16 > +#define R8A7792_CLK_QSPI_MOD 17 > +#define R8A7792_CLK_GPIO9 19 > +#define R8A7792_CLK_GPIO8 21 > +#define R8A7792_CLK_I2C5 25 > +#define R8A7792_CLK_IICDVFS 26 > +#define R8A7792_CLK_I2C4 27 > +#define R8A7792_CLK_I2C3 28 > +#define R8A7792_CLK_I2C2 29 > +#define R8A7792_CLK_I2C1 30 > +#define R8A7792_CLK_I2C0 31 > + > +/* MSTP10 */ > +#define R8A7792_CLK_SSI_ALL 5 > +#define R8A7792_CLK_SSI4 11 > +#define R8A7792_CLK_SSI3 12 > + > +#endif /* __DT_BINDINGS_CLOCK_R8A7792_H__ */ >
