Re: [PATCH] arm64: dts: r8a7795: enable DMA for I2C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 4, 2016 at 2:35 PM, Niklas Söderlund
<niklas.soderlund+renesas@xxxxxxxxxxxx> wrote:
> Add DMA properties to the I2C nodes.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> index a7315eb..49896e4 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -693,6 +693,8 @@
>                         interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 931>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x91>, <&dmac1 0x90>;
> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <110>;
>                         status = "disabled";
>                 };
> @@ -705,6 +707,8 @@
>                         interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 930>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x93>, <&dmac1 0x92>;
> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <6>;
>                         status = "disabled";
>                 };
> @@ -717,6 +721,8 @@
>                         interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 929>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x95>, <&dmac1 0x94>;
> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <6>;
>                         status = "disabled";
>                 };

The three above can be used with SYS-DMAC1 (channels 16-31) or with SYS-DMAC2
(channels 32-47).
It should be tested with the latter before adding the corresponding dmas, as
we had issue with SYS-DMAC2 before (they may have been fixed in firmware in the
mean time).

> @@ -729,6 +735,8 @@
>                         interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 928>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x97>, <&dmac1 0x96>;

The two phandles above should reference "dmac0", as this i2c module can only be
used with SYS-DMAC0 (channels 0-15), according to the datasheet.

> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <110>;
>                         status = "disabled";
>                 };
> @@ -741,6 +749,8 @@
>                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 927>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x99>, <&dmac1 0x98>;

dmac0

> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <110>;
>                         status = "disabled";
>                 };
> @@ -753,6 +763,8 @@
>                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 919>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x9b>, <&dmac1 0x9a>;

dmac0

> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <110>;
>                         status = "disabled";
>                 };
> @@ -765,6 +777,8 @@
>                         interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cpg CPG_MOD 918>;
>                         power-domains = <&cpg>;
> +                       dmas = <&dmac1 0x9d>, <&dmac1 0x9c>;

dmac0

> +                       dma-names = "tx", "rx";
>                         i2c-scl-internal-delay-ns = <6>;
>                         status = "disabled";
>                 };

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux