On Thu, 2016-05-12 at 08:09 +0000, Kuninori Morimoto wrote:
> Hi Zhang, Eduardo
>
> Our platform now is using thermal_zone, but lm-senser became no longer working.
> It works on non thermal_zone. we can get current thermal from
> /sys/class/thermal/thermal_zone0 on thermal_zone.
> What does lm-senser is doing ? and why it doesn't work on thermal_zone ??
>
> -- thermal_zone enable patch --
>
> a8b805f3606f7af7f2b44763d3d6cf05f7c15afd
> (ARM: dts: r8a7790: enable to use thermal-zone)
>
> -- lm-senser error on thermal-zone ----
>
> > sensors
> No sensors found!
> Make sure you loaded all the kernel drivers you need.
> Try sensors-detect to find out which these are.
>
> -- thermal-zone / non thermal-zone situation --
>
> non thermal-zon
> sensor command: OK
> read from /sys/class/thermal/thermal_zone0 : OK
>
> thermal-zon
> sensor command: NG
> read from /sys/class/thermal/thermal_zone0 : OK
config THERMAL_HWMON
bool
prompt "Expose thermal sensors as hwmon device"
depends on HWMON=y || HWMON=THERMAL
default y
please check if the thermal subsystem is built in, while hwmon subsystem
is built as module.
you should either set CONFIG_HWMON=y, or set both CONFIG_HWMON and
CONFIG_THERMAL as module.
thanks,
rui
