Same as on r8a7791. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx> --- This version addresses the issues found by Geert and Simon (thank you): - change back to one DMA controller - use GIC_SPI - add max-frequency CU Uli arch/arm/boot/dts/r8a7793.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 1dd6d20..f76cc4c 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -543,6 +543,19 @@ status = "disabled"; }; + mmcif0: mmcif@ee200000 { + compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7793", "renesas,rcar-gen2-scifa", "renesas,scifa"; -- 2.7.4