Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
---
v3:
Really use GIC_SPI for all interrupts.
v2:
Dropped the "_clk" suffix from the PCIe bus device node's name.
Removed "clock-output-names" property from the PCIe bus node.
Use GIC_SPI for all interrupts.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 57 ++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 868c10e..11f9971 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -131,6 +131,14 @@
status = "disabled";
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -1156,5 +1164,54 @@
power-domains = <&cpg>;
status = "disabled";
};
+ pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7795";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ pciec1: pcie@ee800000 {
+ compatible = "renesas,pcie-r8a7795";
+ reg = <0 0xee800000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+ 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+ 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+ 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
};
};
--
2.5.0
