From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> R-Car Gen2 have two DMA controllers, which are equivalent. Add references to both dmac0 and dmac1 so the driver can fallback to the later if the first one is unavailable. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx> --- arch/arm/boot/dts/r8a7794.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index ec54246879b4..1219f7509433 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -652,8 +652,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&cpg_clocks>; reg-io-width = <4>; status = "disabled"; -- 2.1.4
