It appears that Gen2 is a misnomer for the R-Car PCIE driver which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2 from the help text and Kconfig symbol. Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx> --- Bjorn, if this patch is acceptable I would like to request that we co-ordinate things so that I can queue-up corresponding updates for arm and arm64 defconfigs in the same release. From my point of view v4.7 would make sense. --- drivers/pci/host/Kconfig | 4 ++-- drivers/pci/host/Makefile | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 7a0780d56d2d..9109c6c5298c 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -69,11 +69,11 @@ config PCI_RCAR_GEN2 There are 3 internal PCI controllers available with a single built-in EHCI/OHCI host controller present on each one. -config PCI_RCAR_GEN2_PCIE +config PCI_RCAR_PCIE bool "Renesas R-Car PCIe controller" depends on ARCH_RENESAS || (ARM && COMPILE_TEST) help - Say Y here if you want PCIe controller support on R-Car Gen2 SoCs. + Say Y here if you want PCIe controller support on R-Car SoCs. config PCI_HOST_COMMON bool diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index d85b5faf9bbc..042cf32c14ca 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o -obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o +obj-$(CONFIG_PCI_RCAR_PCIE) += pcie-rcar.o obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o -- 2.1.4
