Re: [PATCH] ARM: dts: lager: use generic pinctrl properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Simon,

Thank you for the patch.

On Wednesday 16 March 2016 10:03:09 Simon Horman wrote:
> Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and
> groups properties") renesas pfc drivers accept generic "function", "pins"
> and "groups" properties.
> 
> This patch updates the lager device tree to use the generic
> rather than renesas-specific properties.
> 
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> Based on renesas-devel-20160315-v4.5
> ---
>  arch/arm/boot/dts/r8a7790-lager.dts | 92 ++++++++++++++++-----------------
>  1 file changed, 46 insertions(+), 46 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts index aa6ca92a9485..a5828721ab7c
> 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -314,119 +314,119 @@
>  	pinctrl-names = "default";
> 
>  	du_pins: du {
> -		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
> -		renesas,function = "du";
> +		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
> +		function = "du";
>  	};
> 
>  	scif0_pins: serial0 {
> -		renesas,groups = "scif0_data";
> -		renesas,function = "scif0";
> +		groups = "scif0_data";
> +		function = "scif0";
>  	};
> 
>  	scif_clk_pins: scif_clk {
> -		renesas,groups = "scif_clk";
> -		renesas,function = "scif_clk";
> +		groups = "scif_clk";
> +		function = "scif_clk";
>  	};
> 
>  	ether_pins: ether {
> -		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
> -		renesas,function = "eth";
> +		groups = "eth_link", "eth_mdio", "eth_rmii";
> +		function = "eth";
>  	};
> 
>  	phy1_pins: phy1 {
> -		renesas,groups = "intc_irq0";
> -		renesas,function = "intc";
> +		groups = "intc_irq0";
> +		function = "intc";
>  	};
> 
>  	scifa1_pins: serial1 {
> -		renesas,groups = "scifa1_data";
> -		renesas,function = "scifa1";
> +		groups = "scifa1_data";
> +		function = "scifa1";
>  	};
> 
>  	sdhi0_pins: sd0 {
> -		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
> -		renesas,function = "sdhi0";
> +		groups = "sdhi0_data4", "sdhi0_ctrl";
> +		function = "sdhi0";
>  	};
> 
>  	sdhi2_pins: sd2 {
> -		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
> -		renesas,function = "sdhi2";
> +		groups = "sdhi2_data4", "sdhi2_ctrl";
> +		function = "sdhi2";
>  	};
> 
>  	mmc1_pins: mmc1 {
> -		renesas,groups = "mmc1_data8", "mmc1_ctrl";
> -		renesas,function = "mmc1";
> +		groups = "mmc1_data8", "mmc1_ctrl";
> +		function = "mmc1";
>  	};
> 
>  	qspi_pins: spi0 {
> -		renesas,groups = "qspi_ctrl", "qspi_data4";
> -		renesas,function = "qspi";
> +		groups = "qspi_ctrl", "qspi_data4";
> +		function = "qspi";
>  	};
> 
>  	msiof1_pins: spi2 {
> -		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
> +		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
>  				 "msiof1_tx";
> -		renesas,function = "msiof1";
> +		function = "msiof1";
>  	};
> 
>  	i2c0_pins: i2c0 {
> -		renesas,groups = "i2c0";
> -		renesas,function = "i2c0";
> +		groups = "i2c0";
> +		function = "i2c0";
>  	};
> 
>  	iic0_pins: iic0 {
> -		renesas,groups = "iic0";
> -		renesas,function = "iic0";
> +		groups = "iic0";
> +		function = "iic0";
>  	};
> 
>  	iic1_pins: iic1 {
> -		renesas,groups = "iic1";
> -		renesas,function = "iic1";
> +		groups = "iic1";
> +		function = "iic1";
>  	};
> 
>  	iic2_pins: iic2 {
> -		renesas,groups = "iic2";
> -		renesas,function = "iic2";
> +		groups = "iic2";
> +		function = "iic2";
>  	};
> 
>  	iic3_pins: iic3 {
> -		renesas,groups = "iic3";
> -		renesas,function = "iic3";
> +		groups = "iic3";
> +		function = "iic3";
>  	};
> 
>  	hsusb_pins: hsusb {
> -		renesas,groups = "usb0_ovc_vbus";
> -		renesas,function = "usb0";
> +		groups = "usb0_ovc_vbus";
> +		function = "usb0";
>  	};
> 
>  	usb0_pins: usb0 {
> -		renesas,groups = "usb0";
> -		renesas,function = "usb0";
> +		groups = "usb0";
> +		function = "usb0";
>  	};
> 
>  	usb1_pins: usb1 {
> -		renesas,groups = "usb1";
> -		renesas,function = "usb1";
> +		groups = "usb1";
> +		function = "usb1";
>  	};
> 
>  	usb2_pins: usb2 {
> -		renesas,groups = "usb2";
> -		renesas,function = "usb2";
> +		groups = "usb2";
> +		function = "usb2";
>  	};
> 
>  	vin1_pins: vin {
> -		renesas,groups = "vin1_data8", "vin1_clk";
> -		renesas,function = "vin1";
> +		groups = "vin1_data8", "vin1_clk";
> +		function = "vin1";
>  	};
> 
>  	sound_pins: sound {
> -		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> -		renesas,function = "ssi";
> +		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		function = "ssi";
>  	};
> 
>  	sound_clk_pins: sound_clk {
> -		renesas,groups = "audio_clk_a";
> -		renesas,function = "audio_clk";
> +		groups = "audio_clk_a";
> +		function = "audio_clk";
>  	};
>  };

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux