On Wed, Mar 16, 2016 at 06:11:07PM +0100, Ulrich Hecht wrote:
> Adds SATA device node to r8a7793.dtsi.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> index 3ebe7d4..abb6851 100644
> --- a/arch/arm/boot/dts/r8a7793.dtsi
> +++ b/arch/arm/boot/dts/r8a7793.dtsi
> @@ -775,6 +775,22 @@
> status = "disabled";
> };
>
> + sata0: sata@ee300000 {
> + compatible = "renesas,sata-r8a7793";
> + reg = <0 0xee300000 0 0x2000>;
> + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp8_clks R8A7793_CLK_SATA0>;
I think you also need a power domains property:
power-domains = <&cpg_clocks>;
> + status = "disabled";
> + };
> +
> + sata1: sata@ee500000 {
> + compatible = "renesas,sata-r8a7793";
> + reg = <0 0xee500000 0 0x2000>;
> + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp8_clks R8A7793_CLK_SATA1>;
Here too.
> + status = "disabled";
> + };
> +
> qspi: spi@e6b10000 {
> compatible = "renesas,qspi-r8a7793", "renesas,qspi";
> reg = <0 0xe6b10000 0 0x2c>;
> --
> 2.6.4
