Hi!
This revision of the PWM for Salvator-X integration series attempts to address the
issues found in Geert's review (thanks for that). Specifically, it
- drops the PFC driver bits that have been queued in sh-pfc-for-v4.6
- replaces ARCH_RCAR_GEN{1,2} with ARCH_RENESAS
- splits the DT patch in three
- enables only one pin group for each device
- describes what the PWM devices are used for
- adds the missing power domain entries
- adds module clock 523 to the MSSR driver
CU
Uli
Harunobu Kurokawa (1):
arm64: defconfig : add PWM driver support
Ryo Kodama (1):
pwm: rcar: Use ARCH_RENESAS
Ulrich Hecht (4):
arm64: dts: r8a7795: Add PWM device nodes
arm64: dts: salvator-x: enable PWM
pwm: add R-Car H3 device tree bindings
clk: shmobile: r8a7795: add PWM clock
.../devicetree/bindings/pwm/renesas,pwm-rcar.txt | 1 +
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 23 +++++++++
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 54 ++++++++++++++++++++++
arch/arm64/configs/defconfig | 2 +
drivers/clk/renesas/r8a7795-cpg-mssr.c | 1 +
drivers/pwm/Kconfig | 2 +-
6 files changed, 82 insertions(+), 1 deletion(-)
--
2.6.4
