From: William Towle <william.towle@xxxxxxxxxxxxxxx>
Add DT entries for vin0, vin0_pins, and adv7612.
Signed-off-by: William Towle <william.towle@xxxxxxxxxxxxxxx>
Signed-off-by: Rob Taylor <rob.taylor@xxxxxxxxxxxxxxx>
[uli: added interrupt, renamed endpoint]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/r8a7790-lager.dts | 40 ++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aa6ca92..a5f727c 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -414,7 +414,12 @@
renesas,function = "usb2";
};
- vin1_pins: vin {
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+ renesas,function = "vin0";
+ };
+
+ vin1_pins: vin1 {
renesas,groups = "vin1_data8", "vin1_clk";
renesas,function = "vin1";
};
@@ -590,6 +595,20 @@
reg = <0x12>;
};
+ hdmi-in@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ remote = <&vin0>;
+
+ port {
+ adv7612: endpoint {
+ remote-endpoint = <&vin0ep0>;
+ };
+ };
+ };
+
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
@@ -705,6 +724,25 @@
status = "okay";
};
+/* HDMI video input */
+&vin0 {
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ status = "ok";
+
+ port {
+ vin0ep0: endpoint {
+ remote-endpoint = <&adv7612>;
+ bus-width = <24>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ data-active = <1>;
+ };
+ };
+};
+
/* composite video input */
&vin1 {
pinctrl-0 = <&vin1_pins>;
--
2.6.4
