Hi Oliver,
Thanks for the review.
> On 03/01/2016 10:34 AM, Ramesh Shanmugasundaram wrote:
> > This patch adds support for the CAN FD controller found in Renesas
> > R-Car SoCs. The controller operates in CAN FD mode by default. Two
> > test modes are available and can be enabled by the
> > "rcar_canfd.testmode" module parameter. Refer to Documentation/kernel-
> parameters.txt.
>
> (..)
>
> > +#ifdef CONFIG_DEBUG_FS
> > +#include <linux/debugfs.h>
> > +
> > +static int rcar_canfd_showregs(struct seq_file *s, void *data) {
> > + struct rcar_canfd_channel *priv = s->private;
> > + u32 ch = priv->channel;
> > + u32 rf = ch + RCANFD_RFFIFO_IDX;
> > + u32 cf = RCANFD_CFFIFO_IDX;
> > + u32 val, offset, i;
> > +
> > + if (testmode)
> > + seq_printf(s, "RCANFD : testmode = %d\n", testmode);
> > + seq_printf(s, "RCANFD register dump: channel %u\n", ch);
> > + seq_printf(s, "%-40s: %x\n", "g: cfg",
> > + rcar_canfd_read(priv, RCANFD_GCFG));
>
> Why do you think you would need this kind of register dumps in debugfs?
>
> This could be interesting for development purposes - but in production
> drivers this is pretty unusual and needless.
I thought it would be useful when we add more features to the driver (e.g. Gateway mode).
>
> I would sugest to remove either the testmode (already suggested by Marc)
> and this register dump stuff.
OK. I'll remove both.
Thanks,
Ramesh
