Re: Salvator-X ravb failure with v4.5-rc3 due to irqchip power down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> The real problem is that the PHY interrupt is wired to an on-chip GPIO
> controller, which is disabled by PM Runtime if no GPIOs are in use, and
> interrupts are not taken into account (the irqchip subsystem is not (yet) PM
> Runtime aware) for GPIO use.
>
> Adding a call to
>
>     pm_runtime_get_sync(dev);
>
> to gpio_rcar_probe() fixes the problem, but keeps the GPIO modules enabled
> all the time.
>
> IIRC, we have a similar issue with HDMI on r8a7791/koelsch...

Exactly, the interrupt for 'EDID read done' never arrived because of
this.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux