This patch set is based on the renesas-drivers.git / renesas-drivers-2016-01-26-v4.5-rc1 tag (commit id = 106b6565bfb6e2f35339347f3cfd0858f08bfcaa), and the following patches: [ renesas_usbhs driver ] http://thread.gmane.org/gmane.linux.usb.general/135895 [ generic phy driver for R-Car H3 ] http://thread.gmane.org/gmane.linux.kernel/2120685 This patch set contains patches that are related to generic phy driver. As I wrote a comment in patch 8, to handle VBUS on/off for USB2.0 host channel 0, I use a regulator driver instead of extcon/max3355 driver. This is a reason that I marked this patch set is a RFC because I'm not sure that this way is acceptable or not. Also patch 6 should resolve checkpatch.pl warnings, and patch 7 should have dmas property to use USB-DMAC. Takeshi Kihara (1): pinctrl: sh-pfc: r8a7795: Add USB2.0 host support Yoshihiro Shimoda (9): phy: rcar-gen3-usb2: Add phy-supply description in device tree doc phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data phy: rcar-gen3-usb2: add extcon support arm64: dts: r8a7795: add usb2_phy device nodes arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes arm64: dts: r8a7795: add HS-USB device node arm64: dts: salvator-x: enable usb2_phy arm64: dts: salvator-x: enable USB 2.0 Host channels arm64: dts: salvator-x: enable HS-USB .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 + arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 73 +++++++++++++- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 107 +++++++++++++++++++++ drivers/phy/Kconfig | 1 + drivers/phy/phy-rcar-gen3-usb2.c | 59 ++++++++---- drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 43 +++++++++ 6 files changed, 265 insertions(+), 20 deletions(-) -- 1.9.1
