Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
are upstream along with the 'extcon' hook in the Renesas USBHS driver, we
can add MAX3355 device node to the Porter device tree and properly refer
to it from the USBHS node instead of using "renesas,enable-gpio" property
which only allowed checking the USB ID pin at the driver probe time; now
this pin's state can be monitored dynamically!
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
This patch is against 'renesas-devel-20160126-v4.5-rc1' tag of Simon Horman's
'renesas.git' repo.
arch/arm/boot/dts/r8a7791-porter.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -90,6 +90,12 @@
1800000 0>;
};
+ max3355: usb-otg {
+ compatible = "maxim,max3355";
+ maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
@@ -394,7 +400,7 @@
pinctrl-names = "default";
status = "okay";
- renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+ extcon = <&max3355>;
};
&usbphy {
