From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
The docs for RCar Gen2 & 3 I have access to, mention delays of 5ms after
stop and 1ms after start. Make it possible to apply these values.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/tmio_mmc_pio.c | 4 ++--
include/linux/mfd/tmio.h | 4 ++++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index a10fde40b6c3dd..de1edb794c53a0 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -185,14 +185,14 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
- msleep(10);
+ msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
}
static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
{
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
- msleep(10);
+ msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);
/* implicit BUG_ON(!res) */
if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 24b86d538e8852..05d58ee5e6a78f 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -65,6 +65,10 @@
* Some controllers can support SDIO IRQ signalling.
*/
#define TMIO_MMC_SDIO_IRQ (1 << 2)
+
+/* Some controllers don't need to wait 10ms for clock changes */
+#define TMIO_MMC_FAST_CLK_CHG (1 << 3)
+
/*
* Some controllers require waiting for the SD bus to become
* idle before writing to some registers.
--
2.1.4
