On 01/19/2016 01:17 PM, Ulrich Hecht wrote:
> SPA location LSB register is at 0x70.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> ---
> drivers/media/i2c/adv7604.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 3787f81..f78d36c 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -2149,6 +2149,10 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
> if (info->type == ADV7604) {
> rep_write(sd, 0x76, spa_loc & 0xff);
> rep_write_clr_set(sd, 0x77, 0x40, (spa_loc & 0x100) >> 2);
> + } else if (info->type == ADV7612) {
> + /* ADV7612 Software Manual Rev. A, p. 15 */
> + rep_write(sd, 0x70, spa_loc & 0xff);
That should just go onto the else branch and replace the FIXME.
> + rep_write_clr_set(sd, 0x71, 0x01, (spa_loc & 0x100) >> 8);
> } else {
> /* FIXME: Where is the SPA location LSB register ? */
> rep_write_clr_set(sd, 0x71, 0x01, (spa_loc & 0x100) >> 8);
>
