The .get_loaded_rsc_table rproc ops implementations in
ti_k3_dsp_remoteproc.c and ti_k3_m4_remoteproc.c drivers return a
pointer to the resource table that was pre-loaded at the base address of
the DDR region reserved for firmware usage. Refactor the implementations
into ti_k3_common.c driver as k3_get_loaded_rsc_table() and align DSP
and M4 drivers to register this common function as .get_loaded_rsc_table
ops.
Signed-off-by: Beleswar Padhi <b-padhi@xxxxxx>
---
drivers/remoteproc/ti_k3_common.c | 33 +++++++++++++++
drivers/remoteproc/ti_k3_common.h | 2 +
drivers/remoteproc/ti_k3_dsp_remoteproc.c | 49 ++++-------------------
drivers/remoteproc/ti_k3_m4_remoteproc.c | 34 +---------------
4 files changed, 44 insertions(+), 74 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_common.c b/drivers/remoteproc/ti_k3_common.c
index b5ef2ac0d399..f56d2553a669 100644
--- a/drivers/remoteproc/ti_k3_common.c
+++ b/drivers/remoteproc/ti_k3_common.c
@@ -349,5 +349,38 @@ int k3_rproc_detach(struct rproc *rproc)
}
EXPORT_SYMBOL_GPL(k3_rproc_detach);
+/*
+ * This function implements the .get_loaded_rsc_table() callback and is used
+ * to provide the resource table for a booted remote processor in IPC-only
+ * mode. The remote processor firmwares follow a design-by-contract approach
+ * and are expected to have the resource table at the base of the DDR region
+ * reserved for firmware usage. This provides flexibility for the remote
+ * processor to be booted by different bootloaders that may or may not have the
+ * ability to publish the resource table address and size through a DT
+ * property.
+ */
+struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc,
+ size_t *rsc_table_sz)
+{
+ struct k3_rproc *kproc = rproc->priv;
+ struct device *dev = kproc->dev;
+
+ if (!kproc->rmem[0].cpu_addr) {
+ dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /*
+ * NOTE: The resource table size is currently hard-coded to a maximum
+ * of 256 bytes. The most common resource table usage for K3 firmwares
+ * is to only have the vdev resource entry and an optional trace entry.
+ * The exact size could be computed based on resource table address, but
+ * the hard-coded value suffices to support the IPC-only mode.
+ */
+ *rsc_table_sz = 256;
+ return (__force struct resource_table *)kproc->rmem[0].cpu_addr;
+}
+EXPORT_SYMBOL_GPL(k3_get_loaded_rsc_table);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TI K3 common Remoteproc code");
diff --git a/drivers/remoteproc/ti_k3_common.h b/drivers/remoteproc/ti_k3_common.h
index c7be85b0e5ac..663911dc7032 100644
--- a/drivers/remoteproc/ti_k3_common.h
+++ b/drivers/remoteproc/ti_k3_common.h
@@ -99,4 +99,6 @@ int k3_rproc_start(struct rproc *rproc);
int k3_rproc_stop(struct rproc *rproc);
int k3_rproc_attach(struct rproc *rproc);
int k3_rproc_detach(struct rproc *rproc);
+struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc,
+ size_t *rsc_table_sz);
#endif /* REMOTEPROC_TI_K3_COMMON_H */
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index dd81bcc8e1e4..0bfa3b730d1f 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -58,38 +58,6 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
return 0;
}
-/*
- * This function implements the .get_loaded_rsc_table() callback and is used
- * to provide the resource table for a booted DSP in IPC-only mode. The K3 DSP
- * firmwares follow a design-by-contract approach and are expected to have the
- * resource table at the base of the DDR region reserved for firmware usage.
- * This provides flexibility for the remote processor to be booted by different
- * bootloaders that may or may not have the ability to publish the resource table
- * address and size through a DT property. This callback is invoked only in
- * IPC-only mode.
- */
-static struct resource_table *k3_dsp_get_loaded_rsc_table(struct rproc *rproc,
- size_t *rsc_table_sz)
-{
- struct k3_rproc *kproc = rproc->priv;
- struct device *dev = kproc->dev;
-
- if (!kproc->rmem[0].cpu_addr) {
- dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found");
- return ERR_PTR(-ENOMEM);
- }
-
- /*
- * NOTE: The resource table size is currently hard-coded to a maximum
- * of 256 bytes. The most common resource table usage for K3 firmwares
- * is to only have the vdev resource entry and an optional trace entry.
- * The exact size could be computed based on resource table address, but
- * the hard-coded value suffices to support the IPC-only mode.
- */
- *rsc_table_sz = 256;
- return (__force struct resource_table *)kproc->rmem[0].cpu_addr;
-}
-
/*
* Custom function to translate a DSP device address (internal RAMs only) to a
* kernel virtual address. The DSPs can access their RAMs at either an internal
@@ -150,12 +118,13 @@ static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool
}
static const struct rproc_ops k3_dsp_rproc_ops = {
- .start = k3_dsp_rproc_start,
- .stop = k3_rproc_stop,
- .attach = k3_rproc_attach,
- .detach = k3_rproc_detach,
- .kick = k3_rproc_kick,
- .da_to_va = k3_dsp_rproc_da_to_va,
+ .start = k3_dsp_rproc_start,
+ .stop = k3_rproc_stop,
+ .attach = k3_rproc_attach,
+ .detach = k3_rproc_detach,
+ .kick = k3_rproc_kick,
+ .da_to_va = k3_dsp_rproc_da_to_va,
+ .get_loaded_rsc_table = k3_get_loaded_rsc_table,
};
static int k3_dsp_rproc_of_get_memories(struct platform_device *pdev,
@@ -374,12 +343,10 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
if (ret)
return dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n");
- /* configure J721E devices for either remoteproc or IPC-only mode */
+ /* configure devices for either remoteproc or IPC-only mode */
if (p_state) {
dev_info(dev, "configured DSP for IPC-only mode\n");
rproc->state = RPROC_DETACHED;
- /* override rproc ops with only required IPC-only mode ops */
- rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table;
} else {
dev_info(dev, "configured DSP for remoteproc mode\n");
}
diff --git a/drivers/remoteproc/ti_k3_m4_remoteproc.c b/drivers/remoteproc/ti_k3_m4_remoteproc.c
index 6b532bda8d1d..e1caa5ee9a0d 100644
--- a/drivers/remoteproc/ti_k3_m4_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_m4_remoteproc.c
@@ -21,38 +21,6 @@
#include "ti_sci_proc.h"
#include "ti_k3_common.h"
-/*
- * This function implements the .get_loaded_rsc_table() callback and is used
- * to provide the resource table for a booted remote processor in IPC-only
- * mode. The remote processor firmwares follow a design-by-contract approach
- * and are expected to have the resource table at the base of the DDR region
- * reserved for firmware usage. This provides flexibility for the remote
- * processor to be booted by different bootloaders that may or may not have the
- * ability to publish the resource table address and size through a DT
- * property.
- */
-static struct resource_table *k3_m4_get_loaded_rsc_table(struct rproc *rproc,
- size_t *rsc_table_sz)
-{
- struct k3_rproc *kproc = rproc->priv;
- struct device *dev = kproc->dev;
-
- if (!kproc->rmem[0].cpu_addr) {
- dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found");
- return ERR_PTR(-ENOMEM);
- }
-
- /*
- * NOTE: The resource table size is currently hard-coded to a maximum
- * of 256 bytes. The most common resource table usage for K3 firmwares
- * is to only have the vdev resource entry and an optional trace entry.
- * The exact size could be computed based on resource table address, but
- * the hard-coded value suffices to support the IPC-only mode.
- */
- *rsc_table_sz = 256;
- return (__force struct resource_table *)kproc->rmem[0].cpu_addr;
-}
-
/*
* Custom function to translate a remote processor device address (internal
* RAMs only) to a kernel virtual address. The remote processors can access
@@ -253,7 +221,7 @@ static const struct rproc_ops k3_m4_rproc_ops = {
.detach = k3_rproc_detach,
.kick = k3_rproc_kick,
.da_to_va = k3_m4_rproc_da_to_va,
- .get_loaded_rsc_table = k3_m4_get_loaded_rsc_table,
+ .get_loaded_rsc_table = k3_get_loaded_rsc_table,
};
static int k3_m4_rproc_probe(struct platform_device *pdev)
--
2.34.1
