On 6/21/24 10:00 AM, Richard Genoud wrote:
Introduce software IPC handshake between the K3-R5 remote proc driver
and the R5 MCU to gracefully stop/reset the remote core.
Upon a stop request, K3-R5 remote proc driver sends a RP_MBOX_SHUTDOWN
mailbox message to the remote R5 core.
The remote core is expected to:
- relinquish all the resources acquired through Device Manager (DM)
- disable its interrupts
- send back a mailbox acknowledgment RP_MBOX_SHUDOWN_ACK
- enter WFI state.
Meanwhile, the K3-R5 remote proc driver does:
- wait for the RP_MBOX_SHUTDOWN_ACK from the remote core
- wait for the remote proc to enter WFI state
- reset the remote core through device manager
Based on work from: Hari Nagalla <hnagalla@xxxxxx>
Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxxxx>
---
drivers/remoteproc/omap_remoteproc.h | 9 +++++-
drivers/remoteproc/ti_k3_r5_remoteproc.c | 40 ++++++++++++++++++++++++
2 files changed, 48 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/omap_remoteproc.h b/drivers/remoteproc/omap_remoteproc.h
index 828e13256c02..c008f11fa2a4 100644
--- a/drivers/remoteproc/omap_remoteproc.h
+++ b/drivers/remoteproc/omap_remoteproc.h
@@ -42,6 +42,11 @@
* @RP_MBOX_SUSPEND_CANCEL: a cancel suspend response from a remote processor
* on a suspend request
*
+ * @RP_MBOX_SHUTDOWN: shutdown request for the remote processor
+ *
+ * @RP_MBOX_SHUTDOWN_ACK: successful response from remote processor for a
+ * shutdown request. The remote processor should be in WFI state short after.
+ *
* Introduce new message definitions if any here.
*
* @RP_MBOX_END_MSG: Indicates end of known/defined messages from remote core
@@ -59,7 +64,9 @@ enum omap_rp_mbox_messages {
RP_MBOX_SUSPEND_SYSTEM = 0xFFFFFF11,
RP_MBOX_SUSPEND_ACK = 0xFFFFFF12,
RP_MBOX_SUSPEND_CANCEL = 0xFFFFFF13,
- RP_MBOX_END_MSG = 0xFFFFFF14,
+ RP_MBOX_SHUTDOWN = 0xFFFFFF14,
+ RP_MBOX_SHUTDOWN_ACK = 0xFFFFFF15,
+ RP_MBOX_END_MSG = 0xFFFFFF16,
};
#endif /* _OMAP_RPMSG_H */
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index a2ead87952c7..918a15e1dd9a 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -21,6 +21,7 @@
#include <linux/pm_runtime.h>
#include <linux/remoteproc.h>
#include <linux/suspend.h>
+#include <linux/iopoll.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -172,8 +173,23 @@ struct k3_r5_rproc {
struct k3_r5_core *core;
struct k3_r5_mem *rmem;
int num_rmems;
+ struct completion shutdown_complete;
};
+/*
+ * This will return true if the remote core is in Wait For Interrupt state.
+ */
+static bool k3_r5_is_core_in_wfi(struct k3_r5_core *core)
+{
+ int ret;
+ u64 boot_vec;
+ u32 cfg, ctrl, stat;
+
+ ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl, &stat);
+
+ return !ret ? !!(stat & PROC_BOOT_STATUS_FLAG_R5_WFI) : false;
Too fancy for me :) Just return if (ret) right after get_status().
Looks like this function is called in a polling loop, if
ti_sci_proc_get_status() fails once, it won't get better,
no need to keep checking, we should just error out of
the polling loop.
Andrew
+}
+
/**
* k3_r5_rproc_mbox_callback() - inbound mailbox message handler
* @client: mailbox client pointer used for requesting the mailbox channel
@@ -209,6 +225,10 @@ static void k3_r5_rproc_mbox_callback(struct mbox_client *client, void *data)
case RP_MBOX_ECHO_REPLY:
dev_info(dev, "received echo reply from %s\n", name);
break;
+ case RP_MBOX_SHUTDOWN_ACK:
+ dev_dbg(dev, "received shutdown_ack from %s\n", name);
+ complete(&kproc->shutdown_complete);
+ break;
default:
/* silently handle all other valid messages */
if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
@@ -634,6 +654,7 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
struct k3_r5_cluster *cluster = kproc->cluster;
struct device *dev = kproc->dev;
struct k3_r5_core *core1, *core = kproc->core;
+ bool wfi;
int ret;
@@ -650,6 +671,24 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
}
}
+ /* Send SHUTDOWN message to remote proc */
+ reinit_completion(&kproc->shutdown_complete);
+ ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_SHUTDOWN);
+ if (ret < 0) {
+ dev_err(dev, "Sending SHUTDOWN message failed: %d. Halting core anyway.\n", ret);
+ } else {
+ ret = wait_for_completion_timeout(&kproc->shutdown_complete,
+ msecs_to_jiffies(1000));
+ if (ret == 0) {
+ dev_err(dev, "Timeout waiting SHUTDOWN_ACK message. Halting core anyway.\n");
+ } else {
+ ret = readx_poll_timeout(k3_r5_is_core_in_wfi, core,
+ wfi, wfi, 200, 2000);
+ if (ret)
+ dev_err(dev, "Timeout waiting for remote proc to be in WFI state. Halting core anyway.\n");
+ }
+ }
+
/* halt all applicable cores */
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
list_for_each_entry(core, &cluster->cores, elem) {
@@ -1410,6 +1449,7 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
goto err_config;
}
+ init_completion(&kproc->shutdown_complete);
init_rmem:
k3_r5_adjust_tcm_sizes(kproc);
