Add MPSS remoteproc node for SDX75 SoC.
Signed-off-by: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdx75.dtsi | 47 +++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 9349b1c4e196..25d3f110abe1 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -890,6 +890,53 @@
reg = <0x0 0x01fc0000 0x0 0x30000>;
};
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sdx75-mpss-pas";
+ reg = <0 0x04080000 0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MSS>;
+ power-domain-names = "cx",
+ "mss";
+
+ memory-region = <&mpssadsp_mem>, <&q6_mpss_dtb_mem>,
+ <&mpss_dsm_mem>, <&mpss_dsm_mem_2>,
+ <&qlink_logging_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_PING
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_PING>;
+ label = "mpss";
+ qcom,remote-pid = <1>;
+ };
+ };
+
sdhc: mmc@8804000 {
compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0 0x08804000 0x0 0x1000>;
--
2.17.1
