From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for
SA8775p SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332 ++++++++++++++++++++++++++++++++++
1 file changed, 332 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index efd588fa2abb..2aebc2a95e5a 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -557,6 +558,121 @@ cpucp_fw_mem: cpucp-fw@db200000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <12>;
+
+ smp2p_cdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <17>;
+
+ smp2p_gpdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <18>;
+
+ smp2p_gpdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -3438,6 +3554,92 @@ cpufreq_hw: cpufreq@18591000 {
#freq-domain-cells = <1>;
};
+ remoteproc_gpdsp0: remoteproc@20c00000 {
+ compatible = "qcom,sa8775p-gpdsp0-pas";
+ reg = <0x0 0x20c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp0_in 0 0>,
+ <&smp2p_gpdsp0_in 2 0>,
+ <&smp2p_gpdsp0_in 1 0>,
+ <&smp2p_gpdsp0_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP0 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp0";
+ qcom,remote-pid = <17>;
+ };
+ };
+
+ remoteproc_gpdsp1: remoteproc@21c00000 {
+ compatible = "qcom,sa8775p-gpdsp1-pas";
+ reg = <0x0 0x21c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp1_in 0 0>,
+ <&smp2p_gpdsp1_in 2 0>,
+ <&smp2p_gpdsp1_in 1 0>,
+ <&smp2p_gpdsp1_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP1 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp1";
+ qcom,remote-pid = <18>;
+ };
+ };
+
ethernet1: ethernet@23000000 {
compatible = "qcom,sa8775p-ethqos";
reg = <0x0 0x23000000 0x0 0x10000>,
@@ -3507,6 +3709,136 @@ ethernet0: ethernet@23040000 {
status = "disabled";
};
+
+ remoteproc_cdsp0: remoteproc@26300000 {
+ compatible = "qcom,sa8775p-cdsp0-pas";
+ reg = <0x0 0x26300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP0>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
+ remoteproc_cdsp1: remoteproc@2a300000 {
+ compatible = "qcom,sa8775p-cdsp1-pas";
+ reg = <0x0 0x2A300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP1>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp1";
+ qcom,remote-pid = <12>;
+ };
+ };
+
+ remoteproc_adsp: remoteproc@30000000 {
+ compatible = "qcom,sa8775p-adsp-pas";
+ reg = <0x0 0x30000000 0x0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
};
thermal-zones {
--
2.43.0
