From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Document the components used to boot the ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 on the SA8775p SoC. Co-developed-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> --- .../bindings/remoteproc/qcom,sa8775p-pas.yaml | 177 +++++++++++++++++++++ 1 file changed, 177 insertions(+) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml new file mode 100644 index 000000000000..77a5e11555de --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sa8775p-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8775p Peripheral Authentication Service + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> + +description: + Qualcomm SA8775p SoC Peripheral Authentication Service loads and boots firmware + on the Qualcomm DSP Hexagon cores. + +properties: + compatible: + enum: + - qcom,sa8775p-adsp-pas + - qcom,sa8775p-cdsp0-pas + - qcom,sa8775p-cdsp1-pas + - qcom,sa8775p-gpdsp0-pas + - qcom,sa8775p-gpdsp1-pas + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - description: Firmware name of the Hexagon core + + memory-region: + items: + - description: Memory region for main Firmware authentication + + interrupts: + maxItems: 5 + + interrupt-names: + maxItems: 5 + +required: + - compatible + - reg + - memory-region + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-adsp-pas + then: + properties: + power-domains: + items: + - description: LCX power domain + - description: LMX power domain + power-domain-names: + items: + - const: lcx + - const: lmx + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-cdsp-pas + then: + properties: + power-domains: + items: + - description: CX power domain + - description: MXC power domain + - description: NSP0 power domain + power-domain-names: + items: + - const: cx + - const: mxc + - const: nsp0 + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-cdsp1-pas + then: + properties: + power-domains: + items: + - description: CX power domain + - description: MXC power domain + - description: NSP1 power domain + power-domain-names: + items: + - const: cx + - const: mxc + - const: nsp1 + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-gpdsp0-pas + - qcom,sa8775p-gpdsp1-pas + then: + properties: + power-domains: + items: + - description: CX power domain + - description: MXC power domain + power-domain-names: + items: + - const: cx + - const: mxc + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + remoteproc@30000000 { + compatible = "qcom,sa8775p-adsp-pas"; + reg = <0x30000000 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; -- 2.43.0
