[PATCH 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>

Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for
SA8775p SoCs.

Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332 ++++++++++++++++++++++++++++++++++
 1 file changed, 332 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 31de73594839..5c0b61a5624b 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
 #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -544,6 +545,121 @@ cpucp_fw_mem: cpucp-fw@db200000 {
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp0 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp0_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp0_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp1 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <12>;
+
+		smp2p_cdsp1_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp1_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-gpdsp0 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <17>;
+
+		smp2p_gpdsp0_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_gpdsp0_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-gpdsp1 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <18>;
+
+		smp2p_gpdsp1_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_gpdsp1_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -2479,6 +2595,92 @@ cpufreq_hw: cpufreq@18591000 {
 			#freq-domain-cells = <1>;
 		};
 
+		remoteproc_gpdsp0: remoteproc@20c00000 {
+			compatible = "qcom,sa8775p-gpdsp0-pas";
+			reg = <0x0 0x20c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp0_in 0 0>,
+					      <&smp2p_gpdsp0_in 2 0>,
+					      <&smp2p_gpdsp0_in 1 0>,
+					      <&smp2p_gpdsp0_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP0 0
+					 &config_noc SLAVE_CLK_CTL 0>;
+
+			memory-region = <&pil_gdsp0_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp0_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp0";
+				qcom,remote-pid = <17>;
+			};
+		};
+
+		remoteproc_gpdsp1: remoteproc@21c00000 {
+			compatible = "qcom,sa8775p-gpdsp1-pas";
+			reg = <0x0 0x21c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp1_in 0 0>,
+					      <&smp2p_gpdsp1_in 2 0>,
+					      <&smp2p_gpdsp1_in 1 0>,
+					      <&smp2p_gpdsp1_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP1 0
+					 &config_noc SLAVE_CLK_CTL 0>;
+
+			memory-region = <&pil_gdsp1_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp1_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP1
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp1";
+				qcom,remote-pid = <18>;
+			};
+		};
+
 		ethernet1: ethernet@23000000 {
 			compatible = "qcom,sa8775p-ethqos";
 			reg = <0x0 0x23000000 0x0 0x10000>,
@@ -2546,6 +2748,136 @@ ethernet0: ethernet@23040000 {
 
 			status = "disabled";
 		};
+
+		remoteproc_cdsp0: remoteproc@26300000 {
+			compatible = "qcom,sa8775p-cdsp0-pas";
+			reg = <0x0 0x26300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP0>;
+			power-domain-names = "cx", "mxc", "nsp0";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+					 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp0_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp0_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
+		remoteproc_cdsp1: remoteproc@2a300000 {
+			compatible = "qcom,sa8775p-cdsp1-pas";
+			reg = <0x0 0x2A300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP1>;
+			power-domain-names = "cx", "mxc", "nsp1";
+
+			interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+					 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp1_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp1_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_NSP1
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp1";
+				qcom,remote-pid = <12>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sa8775p-adsp-pas";
+			reg = <0x0 0x30000000 0x0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
 	};
 
 	thermal-zones {

-- 
2.43.0





[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux