In lockstep mode, r5 core0 uses TCM of R5 core1. Following is lockstep
mode memory region as per hardware reference manual.
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 |
However, driver shouldn't model it as above because R5 core0 TCM and core1
TCM has different power-domains mapped to it.
Hence, TCM address space in lockstep mode should be modeled as 64KB
regions only where each region has its own power-domain as following:
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM0 (64 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM0 (64 KB) | 0x0002_0000 | 0xFFE2_0000 |
| R5_0 ATCM1 (64 KB) | 0x0001_0000 | 0xFFE1_0000 |
| R5_0 BTCM1 (64 KB) | 0x0003_0000 | 0xFFE3_0000 |
This makes driver maintanance easy and makes design robust for future
platorms as well.
Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
---
drivers/remoteproc/xlnx_r5_remoteproc.c | 146 ++----------------------
1 file changed, 12 insertions(+), 134 deletions(-)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index cfbd97b89c26..0f942440b4e2 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -84,12 +84,12 @@ static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
{0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};
-/* In lockstep mode cluster combines each 64KB TCM and makes 128KB TCM */
+/* In lockstep mode cluster uses each 64KB TCM from second core as well */
static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
- {0xffe00000UL, 0x0, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
- {0xffe20000UL, 0x20000, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
- {0, 0, 0, PD_R5_1_ATCM, ""},
- {0, 0, 0, PD_R5_1_BTCM, ""},
+ {0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
+ {0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
+ {0xffe10000UL, 0x10000, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
+ {0xffe30000UL, 0x30000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};
/**
@@ -541,14 +541,14 @@ static int tcm_mem_map(struct rproc *rproc,
}
/*
- * add_tcm_carveout_split_mode()
+ * add_tcm_banks()
* @rproc: single R5 core's corresponding rproc instance
*
- * allocate and add remoteproc carveout for TCM memory in split mode
+ * allocate and add remoteproc carveout for TCM memory
*
* return 0 on success, otherwise non-zero value on failure
*/
-static int add_tcm_carveout_split_mode(struct rproc *rproc)
+static int add_tcm_banks(struct rproc *rproc)
{
struct rproc_mem_entry *rproc_mem;
struct zynqmp_r5_core *r5_core;
@@ -581,10 +581,10 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
ZYNQMP_PM_REQUEST_ACK_BLOCKING);
if (ret < 0) {
dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
- goto release_tcm_split;
+ goto release_tcm;
}
- dev_dbg(dev, "TCM carveout split mode %s addr=%llx, da=0x%x, size=0x%lx",
+ dev_dbg(dev, "TCM carveout %s addr=%llx, da=0x%x, size=0x%lx",
bank_name, bank_addr, da, bank_size);
rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
@@ -594,99 +594,16 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
if (!rproc_mem) {
ret = -ENOMEM;
zynqmp_pm_release_node(pm_domain_id);
- goto release_tcm_split;
- }
-
- rproc_add_carveout(rproc, rproc_mem);
- rproc_coredump_add_segment(rproc, da, bank_size);
- }
-
- return 0;
-
-release_tcm_split:
- /* If failed, Turn off all TCM banks turned on before */
- for (i--; i >= 0; i--) {
- pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
- zynqmp_pm_release_node(pm_domain_id);
- }
- return ret;
-}
-
-/*
- * add_tcm_carveout_lockstep_mode()
- * @rproc: single R5 core's corresponding rproc instance
- *
- * allocate and add remoteproc carveout for TCM memory in lockstep mode
- *
- * return 0 on success, otherwise non-zero value on failure
- */
-static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
-{
- struct rproc_mem_entry *rproc_mem;
- struct zynqmp_r5_core *r5_core;
- int i, num_banks, ret;
- phys_addr_t bank_addr;
- size_t bank_size = 0;
- struct device *dev;
- u32 pm_domain_id;
- char *bank_name;
- u32 da;
-
- r5_core = rproc->priv;
- dev = r5_core->dev;
-
- /* Go through zynqmp banks for r5 node */
- num_banks = r5_core->tcm_bank_count;
-
- /*
- * In lockstep mode, TCM is contiguous memory block
- * However, each TCM block still needs to be enabled individually.
- * So, Enable each TCM block individually.
- * Although ATCM and BTCM is contiguous memory block, add two separate
- * carveouts for both.
- */
- for (i = 0; i < num_banks; i++) {
- pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
-
- /* Turn on each TCM bank individually */
- ret = zynqmp_pm_request_node(pm_domain_id,
- ZYNQMP_PM_CAPABILITY_ACCESS, 0,
- ZYNQMP_PM_REQUEST_ACK_BLOCKING);
- if (ret < 0) {
- dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
- goto release_tcm_lockstep;
- }
-
- bank_size = r5_core->tcm_banks[i]->size;
- if (bank_size == 0)
- continue;
-
- bank_addr = r5_core->tcm_banks[i]->addr;
- da = r5_core->tcm_banks[i]->da;
- bank_name = r5_core->tcm_banks[i]->bank_name;
-
- /* Register TCM address range, TCM map and unmap functions */
- rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
- bank_size, da,
- tcm_mem_map, tcm_mem_unmap,
- bank_name);
- if (!rproc_mem) {
- ret = -ENOMEM;
- zynqmp_pm_release_node(pm_domain_id);
- goto release_tcm_lockstep;
+ goto release_tcm;
}
- /* If registration is success, add carveouts */
rproc_add_carveout(rproc, rproc_mem);
rproc_coredump_add_segment(rproc, da, bank_size);
-
- dev_dbg(dev, "TCM carveout lockstep mode %s addr=0x%llx, da=0x%x, size=0x%lx",
- bank_name, bank_addr, da, bank_size);
}
return 0;
-release_tcm_lockstep:
+release_tcm:
/* If failed, Turn off all TCM banks turned on before */
for (i--; i >= 0; i--) {
pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
@@ -695,45 +612,6 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
return ret;
}
-/*
- * add_tcm_banks()
- * @rproc: single R5 core's corresponding rproc instance
- *
- * allocate and add remoteproc carveouts for TCM memory based on cluster mode
- *
- * return 0 on success, otherwise non-zero value on failure
- */
-static int add_tcm_banks(struct rproc *rproc)
-{
- struct zynqmp_r5_cluster *cluster;
- struct zynqmp_r5_core *r5_core;
- struct device *dev;
-
- r5_core = rproc->priv;
- if (!r5_core)
- return -EINVAL;
-
- dev = r5_core->dev;
-
- cluster = dev_get_drvdata(dev->parent);
- if (!cluster) {
- dev_err(dev->parent, "Invalid driver data\n");
- return -EINVAL;
- }
-
- /*
- * In lockstep mode TCM banks are one contiguous memory region of 256Kb
- * In split mode, each TCM bank is 64Kb and not contiguous.
- * We add memory carveouts accordingly.
- */
- if (cluster->mode == SPLIT_MODE)
- return add_tcm_carveout_split_mode(rproc);
- else if (cluster->mode == LOCKSTEP_MODE)
- return add_tcm_carveout_lockstep_mode(rproc);
-
- return -EINVAL;
-}
-
/*
* zynqmp_r5_parse_fw()
* @rproc: single R5 core's corresponding rproc instance
--
2.25.1
