On 2024-03-01 4:42 pm, abdellatif.elkhlifi@xxxxxxx wrote:
From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
introduce the bindings for Arm remoteproc support.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
---
.../bindings/remoteproc/arm,rproc.yaml | 69 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/arm,rproc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/arm,rproc.yaml b/Documentation/devicetree/bindings/remoteproc/arm,rproc.yaml
new file mode 100644
index 000000000000..322197158059
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/arm,rproc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/arm,rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Remoteproc Devices
+
+maintainers:
+ - Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
+
+description: |
+ Some Arm heterogeneous System-On-Chips feature remote processors that can
+ be controlled with a reset control register and a reset status register to
+ start or stop the processor.
+
+ This document defines the bindings for these remote processors.
+
+properties:
+ compatible:
+ enum:
+ - arm,corstone1000-extsys
+
+ reg:
+ minItems: 2
+ maxItems: 2
+ description: |
+ Address and size in bytes of the reset control register
+ and the reset status register.
+ Expects the registers to be in the order as above.
+ Should contain an entry for each value in 'reg-names'.
+
+ reg-names:
+ description: |
+ Required names for each of the reset registers defined in
+ the 'reg' property. Expects the names from the following
+ list, in the specified order, each representing the corresponding
+ reset register.
+ items:
+ - const: reset-control
+ - const: reset-status
+
+ firmware-name:
+ description: |
+ Default name of the firmware to load to the remote processor.
So... is loading the firmware image achieved by somehow bitbanging it
through the one reset register, maybe? I find it hard to believe this is
a complete and functional binding.
Frankly at the moment I'd be inclined to say it isn't even a remoteproc
binding (or driver) at all, it's a reset controller. Bindings are a
contract for describing the hardware, not the current state of Linux
driver support - if this thing still needs mailboxes, shared memory, a
reset vector register, or whatever else to actually be useful, those
should be in the binding from day 1 so that a) people can write and
deploy correct DTs now, such that functionality becomes available on
their systems as soon as driver support catches up, and b) the community
has any hope of being able to review whether the binding is
appropriately designed and specified for the purpose it intends to serve.
For instance right now it seems somewhat tenuous to describe two
consecutive 32-bit registers as separate "reg" entries, but *maybe* it's
OK if that's all there ever is. However if it's actually going to end up
needing several more additional MMIO and/or memory regions for other
functionality, then describing each register and location individually
is liable to get unmanageable really fast, and a higher-level functional
grouping (e.g. these reset-related registers together as a single 8-byte
region) would likely be a better design.
Thanks,
Robin.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - firmware-name
+
+additionalProperties: false
+
+examples:
+ - |
+ extsys0: remoteproc@1a010310 {
+ compatible = "arm,corstone1000-extsys";
+ reg = <0x1a010310 0x4>, <0x1a010314 0x4>;
+ reg-names = "reset-control", "reset-status";
+ firmware-name = "es0_flashfw.elf";
+ };
+
+ extsys1: remoteproc@1a010318 {
+ compatible = "arm,corstone1000-extsys";
+ reg = <0x1a010318 0x4>, <0x1a01031c 0x4>;
+ reg-names = "reset-control", "reset-status";
+ firmware-name = "es1_flashfw.elf";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 54d6a40feea5..eddaa3841a65 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1768,6 +1768,7 @@ ARM REMOTEPROC DRIVER
M: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
L: linux-remoteproc@xxxxxxxxxxxxxxx
S: Maintained
+F: Documentation/devicetree/bindings/remoteproc/arm,rproc.yaml
F: drivers/remoteproc/arm_rproc.c
ARM SMC WATCHDOG DRIVER
