On Mon, Jan 15, 2024 at 02:52:47PM +0100, Arnaud Pouliquen wrote:
> The "st,stm32mp1-m4-tee" compatible is utilized in a system configuration
> where the Cortex-M4 firmware is loaded by the Trusted execution Environment
> (TEE).
> This compatible is used in both the Linux and OP-TEE device-tree.
> - In OP-TEE, a node is defined in the device tree with the
> st,stm32mp1-m4-tee to support signed remoteproc firmware.
> Based on DT properties, OP-TEE authenticates, loads, starts, and stops
> the firmware.
> - On Linux, when the compatibility is set, the Cortex-M resets should not
> be declared in the device tree.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
> ---
> .../bindings/remoteproc/st,stm32-rproc.yaml | 53 +++++++++++++++----
> 1 file changed, 44 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 370af61d8f28..9fdfa30eff20 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -16,7 +16,12 @@ maintainers:
>
> properties:
> compatible:
> - const: st,stm32mp1-m4
> + enum:
> + - st,stm32mp1-m4
> + - st,stm32mp1-m4-tee
> + description:
> + Use "st,stm32mp1-m4" for the Cortex-M4 coprocessor management by Linux
What if other OSs want to manage the M4?
> + Use "st,stm32mp1-m4-tee" for the Cortex-M4 coprocessor management by secure context
>
> reg:
> description:
> @@ -142,21 +147,41 @@ properties:
> required:
> - compatible
> - reg
> - - resets
>
> allOf:
> - if:
> properties:
> - reset-names:
> - not:
> - contains:
> - const: hold_boot
> + compatible:
> + contains:
> + const: st,stm32mp1-m4
> + then:
> + if:
> + properties:
> + reset-names:
> + not:
> + contains:
> + const: hold_boot
> + then:
> + required:
> + - st,syscfg-holdboot
> + - resets
> + else:
> + properties:
> + st,syscfg-holdboot: false
> + required:
> + - reset-names
Looks like a new required property.
> + - resets
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: st,stm32mp1-m4-tee
> then:
> - required:
> - - st,syscfg-holdboot
> - else:
> properties:
> st,syscfg-holdboot: false
> + reset-names: false
> + resets: false
>
> additionalProperties: false
>
> @@ -188,5 +213,15 @@ examples:
> st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
> st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
> };
> + - |
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + m4@10000000 {
> + compatible = "st,stm32mp1-m4-tee";
> + reg = <0x10000000 0x40000>,
> + <0x30000000 0x40000>,
> + <0x38000000 0x10000>;
> + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
> + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
> + };
>
> ...
> --
> 2.25.1
>
