Re: [REBASE PATCH v5 08/17] arm64: mm: Add dynamic ramoops region support through command line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 11, 2023 at 04:23:50PM +0530, Mukesh Ojha wrote:
> The reserved memory region for ramoops is assumed to be at a fixed
> and known location when read from the devicetree. This may not be
> required for something like Qualcomm's minidump which is interested
> in knowing addresses of ramoops region but it does not put hard
> requirement of address being fixed as most of it's SoC does not
> support warm reset and does not use pstorefs at all instead it has
> firmware way of collecting ramoops region if it gets to know the
> address and register it with apss minidump table which is sitting
> in shared memory region in DDR and firmware will have access to
> these table during reset and collects it on crash of SoC.
> 
> So, add the support of reserving ramoops region to be dynamically
> allocated early during boot if it is request through command line
> via 'dyn_ramoops_size=' and fill up reserved resource structure and
> export the structure, so that it can be read by ramoops driver.
> 
> Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
> ---
>  arch/arm64/mm/init.c       | 94 ++++++++++++++++++++++++++++++++++++++++++++++

Why does this need to be in the arch code? There's absolutely nothing
arm64-specific here.

Will



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux