[PATCH v3 4/4] arm64: dts: qcom: sc7180: Add ADSP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



sc7180 has an ADSP remoteproc that exclusively controls the audio
hardware on devices that use Qualcomm firmware.

Add it along with the relevant audio services.

Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
v2: rename service nodes according to the schema, reorder properties
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 122 +++++++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 322fa478515f..eca1c34d2306 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -20,6 +20,8 @@
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -3781,6 +3783,126 @@ wifi: wifi@18800000 {
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@62400000 {
+			compatible = "qcom,sc7180-adsp-pas";
+			reg = <0 0x62400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7180_LCX>,
+					<&rpmhpd SC7180_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			qcom,qmp = <&aoss_qmp>;
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1001 0x0>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0>;
+						qcom,nsessions = <5>;
+					};
+				};
+			};
+		};
+
 		lpasscc: clock-controller@62d00000 {
 			compatible = "qcom,sc7180-lpasscorecc";
 			reg = <0 0x62d00000 0 0x50000>,

-- 
2.41.0




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux