[V3,01/11] dt-bindings: remoteproc: qcom: Add support for multipd model

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add new binding document for multipd model remoteproc.
IPQ5332, IPQ9574 follows multipd model.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V3:
	- Fixed all comments and rebased for TOT.
	- Removed WCSS userpd compatibles.
	- IPQ5018 support is dropped because it's base port patches not
	  yet merged so added IPQ5332 support.

Changes in V2:
	- Fixed all comments and rebased for TOT.
	- Changed to BSD-3-Clause based on internal open source team
          suggestion.
	- Added firmware-name.

 .../bindings/remoteproc/qcom,multipd-pil.yaml | 189 ++++++++++++++++++
 1 file changed, 189 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
new file mode 100644
index 000000000000..c52ac1640d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multipd Secure Peripheral Image Loader
+
+maintainers:
+  - Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
+
+description:
+  Multipd Peripheral Image Loader loads firmware and boots Q6 protection domain,
+  WCSS protection domain remoteproc's on the Qualcomm IPQ9574, IPQ5332 SoC.
+  Protection domain is similar to process in Linux. Here QDSP6 processor runs
+  each wifi radio functionality on a separate process. One process can't access
+  other process resources, so this is termed as PD i.e protection domain.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5332-q6-mpd
+      - qcom,ipq9574-q6-mpd
+
+  reg:
+    maxItems: 1
+
+  firmware-name:
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the remote processor
+    items:
+      - description: Shutdown Q6
+      - description: Stop Q6
+
+  qcom,smem-state-names:
+    description:
+      Names of the states used by the AP to signal the remote processor
+    items:
+      - const: shutdown
+      - const: stop
+
+  memory-region:
+    items:
+      - description: Q6 reserved region
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the Modem.
+    unevaluatedProperties: false
+
+patternProperties:
+  "^pd-1|pd-2|pd-3":
+    type: object
+    description:
+      WCSS means 'wireless connectivity sub system', in simple words it's a
+      wifi radio block. In multipd model, Q6 root protection domain will
+      provide services to WCSS user protection domain. In other words WCSS
+      protection domains depends on Q6 protection domain i.e  Q6 should be up
+      before WCSS, similarly Q6 should shut down after all WCSS domains are
+      down. It can be achieved by building parent-child topology between Q6
+      and WCSS domain's i.e keeping wcss node as sub node of Q6 device node.
+
+    properties:
+      firmware-name:
+        maxItems: 1
+
+      interrupts:
+        items:
+          - description: Fatal interrupt
+          - description: Ready interrupt
+          - description: Spawn acknowledge interrupt
+          - description: Stop acknowledge interrupt
+
+      interrupt-names:
+        items:
+          - const: fatal
+          - const: ready
+          - const: spawn-ack
+          - const: stop-ack
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description: States used by the AP to signal the remote processor
+        items:
+          - description: Shutdown WCSS pd
+          - description: Stop WCSS pd
+          - description: Spawn WCSS pd
+
+      qcom,smem-state-names:
+        description:
+          Names of the states used by the AP to signal the remote processor
+        items:
+          - const: shutdown
+          - const: stop
+          - const: spawn
+
+    required:
+      - firmware-name
+      - interrupts
+      - interrupt-names
+      - qcom,smem-states
+      - qcom,smem-state-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - firmware-name
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    q6v5_wcss: remoteproc@d100000 {
+      compatible = "qcom,ipq5332-q6-mpd";
+      reg = <0xd100000 0x4040>;
+      firmware-name = "ath11k/IPQ5332/hw1.0/q6_fw0.mdt",
+                      "ath11k/IPQ5332/hw1.0/iu_fw.mdt";
+      interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+                            <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+                            <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+                            <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+                            <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+      interrupt-names = "wdog",
+                        "fatal",
+                        "ready",
+                        "handover",
+                        "stop-ack";
+
+      qcom,smem-states = <&wcss_smp2p_out 0>,
+                         <&wcss_smp2p_out 1>;
+      qcom,smem-state-names = "shutdown",
+                              "stop";
+
+      memory-region = <&q6_region>;
+
+      glink-edge {
+        interrupts = <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+        label = "rtr";
+        qcom,remote-pid = <1>;
+        mboxes = <&apcs_glb 8>;
+      };
+
+      pd-1 {
+        firmware-name = "ath11k/IPQ5332/hw1.0/q6_fw1.mdt";
+        interrupts-extended = <&wcss_smp2p_in 8 IRQ_TYPE_NONE>,
+                              <&wcss_smp2p_in 9 IRQ_TYPE_NONE>,
+                              <&wcss_smp2p_in 12 IRQ_TYPE_NONE>,
+                              <&wcss_smp2p_in 11 IRQ_TYPE_NONE>;
+        interrupt-names = "fatal",
+                          "ready",
+                          "spawn-ack",
+                          "stop-ack";
+        qcom,smem-states = <&wcss_smp2p_out 8>,
+                           <&wcss_smp2p_out 9>,
+                           <&wcss_smp2p_out 10>;
+        qcom,smem-state-names = "shutdown",
+                                "stop",
+                                "spawn";
+      };
+    };
-- 
2.34.1




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux