Add a simple driver for the qcom,rpm-proc compatible that registers the
"smd-edge" and populates other children defined in the device tree.
Note that the DT schema belongs to the remoteproc subsystem while this
driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc,
but as an implementation detail in Linux it can currently not benefit
from anything provided by the remoteproc subsystem. The RPM firmware is
usually already loaded and started by earlier components in the boot
chain and is not meant to be ever restarted.
To avoid breaking existing kernel configurations the driver is always
built when smd-rpm.c is also built. They belong closely together anyway.
To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if
rpm-proc is.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
drivers/soc/qcom/Kconfig | 1 +
drivers/soc/qcom/Makefile | 2 +-
drivers/soc/qcom/rpm-proc.c | 77 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 79 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e597799e8121..715348869d04 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -191,6 +191,7 @@ config QCOM_SMD_RPM
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
+ depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
help
If you say yes to this option, support will be included for the
Resource Power Manager system found in the Qualcomm 8974 based
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 99114c71092b..113b9ff2ad43 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_QCOM_RPM_MASTER_STATS) += rpm_master_stats.o
obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o
qcom_rpmh-y += rpmh-rsc.o
qcom_rpmh-y += rpmh.o
-obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
+obj-$(CONFIG_QCOM_SMD_RPM) += rpm-proc.o smd-rpm.o
obj-$(CONFIG_QCOM_SMEM) += smem.o
obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
diff --git a/drivers/soc/qcom/rpm-proc.c b/drivers/soc/qcom/rpm-proc.c
new file mode 100644
index 000000000000..2995d9b90190
--- /dev/null
+++ b/drivers/soc/qcom/rpm-proc.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2021-2023, Stephan Gerhold <stephan@xxxxxxxxxxx> */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/rpmsg/qcom_smd.h>
+
+static int rpm_proc_probe(struct platform_device *pdev)
+{
+ struct qcom_smd_edge *edge = NULL;
+ struct device *dev = &pdev->dev;
+ struct device_node *edge_node;
+ int ret;
+
+ edge_node = of_get_child_by_name(dev->of_node, "smd-edge");
+ if (edge_node) {
+ edge = qcom_smd_register_edge(dev, edge_node);
+ of_node_put(edge_node);
+ if (IS_ERR(edge))
+ return dev_err_probe(dev, PTR_ERR(edge),
+ "Failed to register smd-edge\n");
+ }
+
+ ret = devm_of_platform_populate(dev);
+ if (ret) {
+ dev_err(dev, "Failed to populate child devices: %d\n", ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, edge);
+ return 0;
+err:
+ if (edge)
+ qcom_smd_unregister_edge(edge);
+ return ret;
+}
+
+static void rpm_proc_remove(struct platform_device *pdev)
+{
+ struct qcom_smd_edge *edge = platform_get_drvdata(pdev);
+
+ if (edge)
+ qcom_smd_unregister_edge(edge);
+}
+
+static const struct of_device_id rpm_proc_of_match[] = {
+ { .compatible = "qcom,rpm-proc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rpm_proc_of_match);
+
+static struct platform_driver rpm_proc_driver = {
+ .probe = rpm_proc_probe,
+ .remove_new = rpm_proc_remove,
+ .driver = {
+ .name = "qcom-rpm-proc",
+ .of_match_table = rpm_proc_of_match,
+ },
+};
+
+static int __init rpm_proc_init(void)
+{
+ return platform_driver_register(&rpm_proc_driver);
+}
+arch_initcall(rpm_proc_init);
+
+static void __exit rpm_proc_exit(void)
+{
+ platform_driver_unregister(&rpm_proc_driver);
+}
+module_exit(rpm_proc_exit);
+
+MODULE_DESCRIPTION("Qualcomm RPM processor/subsystem driver");
+MODULE_AUTHOR("Stephan Gerhold <stephan@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
2.40.1
