[PATCH v2 05/12] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are
described as remote processors in the device tree, with a dedicated
node where properties and services related to them can be described.

The Resource Power Manager (RPM) is also such a subsystem, with a
remote processor that is running a special firmware. Unfortunately,
the RPM never got a dedicated node representing it properly in the
device tree. Most of the RPM services are described below a top-level
/smd or /rpm-glink node.

However, SMD/GLINK is just one of the communication channels to the RPM
firmware. For example, the MPM interrupt functionality provided by the
RPM does not use SMD/GLINK but writes directly to a special memory
region allocated by the RPM firmware in combination with a mailbox.
Currently there is no good place in the device tree to describe this
functionality. It doesn't belong below SMD/GLINK but it's not an
independent top-level device either.

Introduce a new "qcom,rpm-proc" compatible that allows describing the
RPM as a remote processor/subsystem like all others. The SMD/GLINK node
is moved to a "smd-edge"/"glink-edge" subnode consistent with other
existing bindings. Additional subnodes (e.g. interrupt-controller for
MPM, rpm-master-stats) can be also added there.

Deprecate using the old top-level /smd node since all SMD edges
are now specified as subnodes of the remote processor.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
This patch is based on qcom/for-next, since it needs the new
qcom,rpm-master-stats.yaml schema that is only applied there.
---
 .../bindings/remoteproc/qcom,rpm-proc.yaml         | 171 +++++++++++++++++++++
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml |   6 +-
 .../devicetree/bindings/soc/qcom/qcom,smd.yaml     |   7 +
 3 files changed, 181 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
new file mode 100644
index 000000000000..9c016613463f
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem
+
+maintainers:
+  - Bjorn Andersson <andersson@xxxxxxxxxx>
+  - Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
+  - Stephan Gerhold <stephan@xxxxxxxxxxx>
+
+description: |
+  Resource Power Manager (RPM) subsystem found in various Qualcomm platforms:
+
+                  +--------------------------------------------+
+                  |       RPM subsystem (qcom,rpm-proc)        |
+                  |                                            |
+            reset | +---------------+     +-----+  +-----+     |
+          --------->|               |     | MPM |  | CPR | ... |
+   IPC interrupts | | ARM Cortex-M3 |---  +-----+  +-----+     |
+  ----------------->|               |  |     |        |        |
+                  | +---------------+  |---------------------- |
+                  | +---------------+  |                       |
+                  | |   Code RAM    |--|  +------------------+ |
+                  | +---------------+  |  |                  | |
+                  | +---------------+  |--|   Message RAM    | |
+                  | |   Data RAM    |--|  |                  | |
+                  | +---------------+  |  +------------------+ |
+                  +--------------------|-----------------------+
+                                       v
+                                      NoC
+
+  The firmware running on the processor inside the RPM subsystem allows each
+  component in the system to vote for state of the system resources, such as
+  clocks, regulators and bus frequencies. It implements multiple separate
+  communication interfaces that are described in subnodes, e.g. SMD and MPM:
+
+             +------------------------------+
+             |        ARM Cortex-M3         |
+             |                              |   +------------------------------+
+             | +--------------------------+ |   |          Message RAM         |
+             | |  RPM firmware            | |   |                              |
+   IPC IRQ 0 | | +----------------------+ | |   | +--------------------------+ |
+  -------------->| SMD server           |<------->| SMD data structures      | |
+             | | | +--------------+     | | |   | | +--------------+         | |
+             | | | | rpm_requests | ... | | |   | | | rpm_requests |   ...   | |
+             | | | +--------------+     | | |   | | +--------------+         | |
+   IPC IRQ 1 | | +----------------------+ | |   | +--------------------------+ |
+  -------------->| MPM virtualization   |<--------| MPM register copy (vMPM) | |
+             | | +----------------------+ | |   | +--------------------------+ |
+             | |           ...      |     | |   |              ...             |
+             | +--------------------|-----+ |   +------------------------------+
+             +----------------------|-------+
+                                    v
+                             +--------------+
+                             | MPM Hardware |
+                             +--------------+
+
+  The services provided by the firmware are only available after the firmware
+  has been loaded and the processor has been released from reset. Usually this
+  happens early in the boot process before the operating system is started.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8084-rpm-proc
+          - qcom,ipq6018-rpm-proc
+          - qcom,ipq9574-rpm-proc
+          - qcom,mdm9607-rpm-proc
+          - qcom,msm8226-rpm-proc
+          - qcom,msm8610-rpm-proc
+          - qcom,msm8909-rpm-proc
+          - qcom,msm8916-rpm-proc
+          - qcom,msm8917-rpm-proc
+          - qcom,msm8936-rpm-proc
+          - qcom,msm8937-rpm-proc
+          - qcom,msm8952-rpm-proc
+          - qcom,msm8953-rpm-proc
+          - qcom,msm8974-rpm-proc
+          - qcom,msm8976-rpm-proc
+          - qcom,msm8994-rpm-proc
+          - qcom,msm8996-rpm-proc
+          - qcom,msm8998-rpm-proc
+          - qcom,qcm2290-rpm-proc
+          - qcom,qcs404-rpm-proc
+          - qcom,sdm660-rpm-proc
+          - qcom,sm6115-rpm-proc
+          - qcom,sm6125-rpm-proc
+          - qcom,sm6375-rpm-proc
+      - const: qcom,rpm-proc
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the RPM subsystem.
+
+  glink-rpm:
+    $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge,
+      channels and devices related to the RPM subsystem.
+
+  interrupt-controller:
+    type: object
+    $ref: /schemas/interrupt-controller/qcom,mpm.yaml#
+    description:
+      MSM Power Manager (MPM) interrupt controller that monitors interrupts
+      when the system is asleep.
+
+  master-stats:
+    $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+    description:
+      Subsystem-level low-power mode statistics provided by RPM.
+
+required:
+  - compatible
+
+oneOf:
+  - required:
+      - smd-edge
+  - required:
+      - glink-rpm
+
+additionalProperties: false
+
+examples:
+  # SMD
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+      compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+      smd-edge {
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 0>;
+        qcom,smd-edge = <15>;
+
+        rpm-requests {
+          compatible = "qcom,rpm-msm8916";
+          qcom,smd-channels = "rpm_requests";
+          /* ... */
+        };
+      };
+    };
+  # GLINK
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+      compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+      glink-rpm {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+        mboxes = <&apcs_glb 0>;
+
+        rpm-requests {
+          compatible = "qcom,rpm-qcm2290";
+          qcom,glink-channels = "rpm_requests";
+          /* ... */
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index c6930706bfa9..2fa725b8af5d 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -120,10 +120,10 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    smd {
-        compatible = "qcom,smd";
+    remoteproc {
+        compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
 
-        rpm {
+        smd-edge {
             interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
             qcom,ipc = <&apcs 8 0>;
             qcom,smd-edge = <15>;
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
index 063e595c12f7..4819ce90d206 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -15,6 +15,12 @@ description:
   The Qualcomm Shared Memory Driver is a FIFO based communication channel for
   sending data between the various subsystems in Qualcomm platforms.
 
+  Using the top-level SMD node is deprecated. Instead, the SMD edges are defined
+  directly below the device node representing the respective remote subsystem
+  or remote processor.
+
+deprecated: true
+
 properties:
   compatible:
     const: qcom,smd
@@ -37,6 +43,7 @@ examples:
   # The following example represents a smd node, with one edge representing the
   # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
   # "rpm_request" channel.
+  # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead.
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 

-- 
2.40.1




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux