On Mon, 05 Jun 2023 09:08:21 +0200, Stephan Gerhold wrote: > On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are > described as remote processors in the device tree, with a dedicated > node where properties and services related to them can be described. > > The Resource Power Manager (RPM) is also such a subsystem, with a > remote processor that is running a special firmware. Unfortunately, > the RPM never got a dedicated node representing it properly in the > device tree. Most of the RPM services are described below a top-level > /smd or /rpm-glink node. > > However, SMD/GLINK is just one of the communication channels to the RPM > firmware. For example, the MPM interrupt functionality provided by the > RPM does not use SMD/GLINK but writes directly to a special memory > region allocated by the RPM firmware in combination with a mailbox. > Currently there is no good place in the device tree to describe this > functionality. It doesn't belong below SMD/GLINK but it's not an > independent top-level device either. > > Introduce a new "qcom,rpm-proc" compatible that allows describing the > RPM as a remote processor/subsystem like all others. The SMD/GLINK node > is moved to a "smd-edge"/"glink-edge" subnode consistent with other > existing bindings. Additional subnodes (e.g. interrupt-controller for > MPM, rpm-master-stats) can be also added there. > > Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> > --- > .../bindings/remoteproc/qcom,rpm-proc.yaml | 125 +++++++++++++++++++++ > 1 file changed, 125 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230531-rpm-rproc-v1-5-e0a3b6de1f14@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
