The SCP rproc driver has a set of chip dependent callbacks for
boot sequence and IRQ handling. Implement these callbacks for MT8195
SCP core 1.
Signed-off-by: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
drivers/remoteproc/mtk_common.h | 9 ++++++
drivers/remoteproc/mtk_scp.c | 56 +++++++++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index ea6fa1100a00..c0905aec3b4b 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -47,6 +47,7 @@
#define MT8192_SCP2SPM_IPC_CLR 0x4094
#define MT8192_GIPC_IN_SET 0x4098
#define MT8192_HOST_IPC_INT_BIT BIT(0)
+#define MT8195_CORE1_HOST_IPC_INT_BIT BIT(4)
#define MT8192_CORE0_SW_RSTN_CLR 0x10000
#define MT8192_CORE0_SW_RSTN_SET 0x10004
@@ -56,6 +57,14 @@
#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS GENMASK(7, 4)
+#define MT8195_CPU1_SRAM_PD 0x1084
+#define MT8195_SSHUB2APMCU_IPC_SET 0x4088
+#define MT8195_SSHUB2APMCU_IPC_CLR 0x408C
+#define MT8195_CORE1_SW_RSTN_CLR 0x20000
+#define MT8195_CORE1_SW_RSTN_SET 0x20004
+#define MT8195_CORE1_MEM_ATT_PREDEF 0x20008
+#define MT8195_CORE1_WDT_CFG 0x20034
+
#define SCP_FW_VER_LEN 32
#define SCP_SHARE_BUFFER_SIZE 288
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index dcc94ee2458d..d66822dad943 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -176,6 +176,16 @@ static void mt8192_scp_reset_deassert(struct mtk_scp *scp)
writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_CLR);
}
+static void mt8195_scp_c1_reset_assert(struct mtk_scp *scp)
+{
+ writel(1, scp->reg_base + MT8195_CORE1_SW_RSTN_SET);
+}
+
+static void mt8195_scp_c1_reset_deassert(struct mtk_scp *scp)
+{
+ writel(1, scp->reg_base + MT8195_CORE1_SW_RSTN_CLR);
+}
+
static void mt8183_scp_irq_handler(struct mtk_scp *scp)
{
u32 scp_to_host;
@@ -212,6 +222,18 @@ static void mt8192_scp_irq_handler(struct mtk_scp *scp)
}
}
+static void mt8195_scp_c1_irq_handler(struct mtk_scp *scp)
+{
+ u32 scp_to_host;
+
+ scp_to_host = readl(scp->reg_base + MT8195_SSHUB2APMCU_IPC_SET);
+
+ if (scp_to_host & MT8192_SCP_IPC_INT_BIT)
+ scp_ipi_handler(scp);
+
+ writel(scp_to_host, scp->reg_base + MT8195_SSHUB2APMCU_IPC_CLR);
+}
+
static irqreturn_t scp_irq_handler(int irq, void *priv)
{
struct mtk_scp *scp = priv;
@@ -453,6 +475,19 @@ static int mt8195_scp_before_load(struct mtk_scp *scp)
return 0;
}
+static int mt8195_scp_c1_before_load(struct mtk_scp *scp)
+{
+ scp_sram_power_on(scp->reg_base + MT8195_CPU1_SRAM_PD, 0);
+
+ /* hold SCP in reset while loading FW. */
+ scp->data->scp_reset_assert(scp);
+
+ /* enable MPU for all memory regions */
+ writel(0xff, scp->reg_base + MT8195_CORE1_MEM_ATT_PREDEF);
+
+ return 0;
+}
+
static int scp_load(struct rproc *rproc, const struct firmware *fw)
{
struct mtk_scp *scp = rproc->priv;
@@ -625,6 +660,15 @@ static void mt8195_scp_stop(struct mtk_scp *scp)
writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);
}
+static void mt8195_scp_c1_stop(struct mtk_scp *scp)
+{
+ /* Power off CPU SRAM */
+ scp_sram_power_off(scp->reg_base + MT8195_CPU1_SRAM_PD, 0);
+
+ /* Disable SCP watchdog */
+ writel(0, scp->reg_base + MT8195_CORE1_WDT_CFG);
+}
+
static int scp_stop(struct rproc *rproc)
{
struct mtk_scp *scp = rproc->priv;
@@ -989,6 +1033,18 @@ static const struct mtk_scp_of_data mt8195_of_data = {
.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
};
+static const struct mtk_scp_of_data mt8195_of_data_c1 = {
+ .scp_clk_get = mt8195_scp_clk_get,
+ .scp_before_load = mt8195_scp_c1_before_load,
+ .scp_irq_handler = mt8195_scp_c1_irq_handler,
+ .scp_reset_assert = mt8195_scp_c1_reset_assert,
+ .scp_reset_deassert = mt8195_scp_c1_reset_deassert,
+ .scp_stop = mt8195_scp_c1_stop,
+ .scp_da_to_va = mt8192_scp_da_to_va,
+ .host_to_scp_reg = MT8192_GIPC_IN_SET,
+ .host_to_scp_int_bit = MT8195_CORE1_HOST_IPC_INT_BIT,
+};
+
static const struct of_device_id mtk_scp_of_match[] = {
{ .compatible = "mediatek,mt8183-scp", .data = &mt8183_of_data },
{ .compatible = "mediatek,mt8186-scp", .data = &mt8186_of_data },
--
2.18.0
